Wisconsin, Richland County Remodeler Permit Regulations and County Ordinances for Unincorporated Areas
Richland County, Wisconsin Remodeling and Renovation Permit Requirements
Richland County, Wisconsin, handles building and safety matters through its Land Use and Zoning Department, which acts as the Authority Having Jurisdiction (AHJ) for unincorporated areas. Incorporated cities and villages within the county may have their own building departments and permit processes.
Unincorporated Areas
For properties located in unincorporated areas of Richland County, all new construction, additions, alterations, and certain types of demolition require permits. This ensures compliance with state building codes and local ordinances.
Demolition Work
Demolition work during a remodel in unincorporated Richland County generally triggers a permit requirement. This is to ensure proper disposal of materials, including hazardous substances, and to maintain safety during the demolition process. Specific requirements may vary based on the scope of the demolition.
Converting Non-Living Spaces
Converting non-living spaces such as garages, attics, or unfinished basements into habitable living areas in unincorporated Richland County requires a building permit. This process involves ensuring that the converted space meets all applicable building codes for habitable areas, including requirements for:
- Egress (e.g., proper windows and doors)
- Ventilation
- Insulation
- Electrical and plumbing systems
- Fire safety
The definition of "habitable space" typically refers to any space within a dwelling intended for living, sleeping, eating, or cooking. Therefore, any alteration that makes these spaces suitable for such uses will necessitate a permit.
Resources to Learn More
Note: The following state-wide building codes and regulations apply universally to all jurisdictions within Wisconsin, including Richland County.
Wisconsin Remodeler Legislation, Codes, and Guidelines
Wisconsin State Building Codes and Legislation for Remodelers and Residential Renovations
Wisconsin's building codes for remodelers and residential renovations are primarily governed by the Department of Safety and Professional Services (DSPS). The state adopts and modifies model codes from the International Code Council (ICC) to create its own administrative codes.
1. Specific State Statutes and Codes Adopted
- For one- and two-family dwellings, the Uniform Dwelling Code (UDC), found in Wisconsin Administrative Code chapters SPS 320-325, applies. This code sets minimum standards for fire safety, structural strength, energy conservation, and general health and safety. The UDC is based on model codes but includes Wisconsin-specific adjustments.
- For commercial and multi-family residential buildings, Wisconsin is transitioning to the 2021 International Building Code (IBC) standards, with additional state-specific adjustments. This updated code will take effect on September 1, 2025, and will be found in Wisconsin Administrative Code chapters SPS 361-366. Previously, the state used the 2015 editions of the model codes.
- The International Existing Building Code (IEBC) is adopted and modified within Chapter SPS 366 of the Wisconsin Administrative Code, which covers the repair, alteration, change of occupancy, addition, or relocation of existing buildings.
2. Primary State Board or Agencies
- The Department of Safety and Professional Services (DSPS) is the primary state agency responsible for setting and enforcing building codes and standards in Wisconsin.
- Local municipalities also play a role in enforcing the UDC and may have their own specific permit requirements.
3. Classification of Remodels and Demolition Guidelines
- Cosmetic vs. Structural Alterations: The UDC covers alterations to one- and two-family dwellings. While inspectors focus on code compliance, "cosmetic or non-code workmanship items will not normally be ordered corrected." However, deviations from approved plans may require revised submittals. The Wisconsin Home Improvement Practices Act (HIPA), found in Chapter ATCP 110 of the Administrative Code, defines "home improvement" broadly to include remodeling, altering, repairing, painting, or modernizing residential property, including additions. The definition of "remodel" in Wis. Stat. ยง 101.148 specifically means to alter or reconstruct a dwelling, and does not include maintenance or repair work.
- When Demolition Guidelines Apply: Demolition activities require a demolition permit, which ensures compliance with local building codes and zoning laws. Specific requirements may include asbestos inspections for buildings constructed before the 1980s, utility clearances, and environmental inspections. In some municipalities, like Milwaukee, there are specific deconstruction ordinances for older structures to maximize salvageable materials. For demolition permits, all utility connections must be sealed and plugged, and a permit for boarding is not required if a demolition permit is obtained.
Resources to Learn More