Shawnee, Kansas Remodeler Local Permit Ordinances and Codes
Shawnee, Kansas Municipal Permit Ordinances for Remodelers and Home Renovations
The City of Shawnee's Community Development Department, specifically the Building Codes Division, is the Authority Having Jurisdiction for issuing building permits and overseeing construction compliance.
Permit Triggers for Demolition vs. Building Permits
- A full building demolition requires a distinct demolition permit.
- Partial demolition involving the removal of structural elements (walls, roof sections, floors) requires a building permit. Structural plans may be necessary to show how the remaining structure will be supported.
- Removing small accessory structures (sheds, carports, small outbuildings) built after 1978 and not in a historic district may be exempt from a demolition permit, though utility disconnection and proper disposal are still required.
- Demolition of structures built before 1978 requires a permit and an asbestos survey.
- Any structural changes or additions, electrical upgrades, or demolitions require permits.
Space Alterations and Conversion of Non-Living Spaces
- Converting non-living spaces like basements or garages into habitable areas generally requires a building permit. Specific guidelines for basement finishes are available.
- Attic conversions that do not extend the roofline are considered remodels and may require a miscellaneous permit detailing the remodel parameters.
- Habitable rooms must have a minimum area of 70 square feet.
- Zoning regulations are detailed in the Shawnee Municipal Code Titles 16 (Subdivision Ordinance) and 17 (Zoning Ordinance).
Fees and Inspection Stages
- Building permit fees are based on the valuation of the project. A fee schedule is available, and for valuations over $100,000, the fee is calculated based on a base rate plus an additional amount per thousand dollars of valuation.
- Demolition permit fees vary based on the scope of the project, with estimated fees ranging from $140 to $700 for full demolitions and $70 to $350 for partial demolitions. The specific demolition permit fee is $60.
- Re-inspection fees are charged if an inspection is required more than once, with a minimum one-hour charge.
- Building inspections are conducted in accordance with the city's adopted building codes and standards.
- Plans prepared by a design professional are required for all buildings, including single-family and two-family residential structures.
- Permit applications can be submitted in person at Shawnee City Hall or online through citizenserve.com/shawnee.
Resources to Learn More
Because Shawnee is located within Johnson County, the following broader county regulations may also apply to your project:
Kansas, Johnson County Remodeler Permit Regulations and County Ordinances for Unincorporated Areas
Johnson County, Kansas Remodeler and Renovation Permit Requirements
Johnson County, Kansas, through its Building & Safety Division, oversees building permits and inspections for properties within its jurisdiction. This division acts as the Authority Having Jurisdiction (AHJ) for unincorporated areas of the county. For properties within incorporated cities, the respective city's building department is the AHJ.
Unincorporated Areas
In unincorporated areas of Johnson County, all construction, alteration, repair, demolition, or change in occupancy of any building or structure requires a permit issued by the Johnson County Building & Safety Division. This ensures compliance with adopted building codes, including the International Building Code, International Residential Code, International Mechanical Code, International Plumbing Code, International Fuel Gas Code, and the International Fire Code, as well as local amendments.
Demolition Work
Demolition work during a remodel in unincorporated Johnson County typically triggers a permit requirement. This is to ensure that demolition is conducted safely, with proper procedures for asbestos abatement (if applicable), utility disconnections, and site safety. Specific requirements may vary based on the scope of the demolition.
Converting Non-Living Spaces
Altering or converting non-living spaces such as garages, attics, or unfinished basements into habitable living areas in unincorporated Johnson County requires a building permit. This process involves ensuring that the converted space meets the same code requirements as new construction for habitable areas. Key considerations include:
- Structural Integrity: Ensuring the existing structure can support the intended use and any new loads.
- Egress: Providing adequate emergency escape and rescue openings (e.g., windows of a specific size and height from the floor).
- Ventilation and Insulation: Meeting requirements for heating, ventilation, and air conditioning (HVAC) and insulation.
- Fire Safety: Complying with fire-resistance ratings for walls and ceilings, and ensuring proper smoke detection.
- Plumbing and Electrical: Installing new plumbing and electrical systems that meet code standards for habitable spaces.
The definition of "habitable space" generally refers to areas intended for sleeping, living, or cooking. Garages, attics, and basements are often considered non-habitable until they are brought up to code standards through a renovation permit process.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Kansas:
Kansas Remodeler Legislation, Codes, and Guidelines
Kansas State-Level Building Codes and Legislation for Remodelers and Residential Renovations
Kansas operates under a "Home Rule" system, meaning there is no single, statewide building code. Instead, building codes are adopted and amended at the local level by individual cities and counties. This results in a varied regulatory landscape across the state, where the specific adopted versions of model codes and local amendments can differ significantly from one jurisdiction to another. Therefore, it is crucial for remodelers and those undertaking residential renovations to verify the exact codes and ordinances with the Authority Having Jurisdiction (AHJ) for the project's specific location.
1. Specific State Statutes and Codes Adopted
While there isn't a statewide mandate, many Kansas jurisdictions adopt versions of the International Code Council (ICC) model codes. Common adoptions include:
- International Building Code (IBC)
- International Residential Code (IRC)
- International Existing Building Code (IEBC)
- International Fire Code (IFC)
- International Mechanical Code (IMC)
- International Plumbing Code (IPC)
- International Fuel Gas Code (IFGC)
- International Energy Conservation Code (IECC)
- National Electrical Code (NEC)
For example, Johnson County adopted the 2018 International Codes, including the 2018 IEBC, effective July 1, 2020. Manhattan adopted the 2021 International Codes, including the 2021 IEBC, effective January 1, 2023. Sedgwick County has adopted the 2024 IBC and 2024 IEBC, alongside the 2018 IRC. Lawrence adopted the 2018 International Codes, including the 2018 IEBC.
2. Primary State Boards or Agencies
The primary entities responsible for setting and enforcing building standards in Kansas are the local city and county building departments, often referred to as the Authority Having Jurisdiction (AHJ). Organizations like the Johnson County Building Officials Association and the Kansas Association of Code Enforcement work towards uniformity and consistency in code adoption and interpretation across jurisdictions. The Kansas State Fire Marshal's office also plays a role, particularly concerning life safety requirements for certain types of facilities and public buildings.
3. Classification of Remodels and Demolition Guidelines
The distinction between cosmetic remodels and structural alterations is generally guided by the scope of work and its impact on the building's integrity. Cosmetic work, such as painting, wallpapering, or replacing fixtures, typically does not require a permit. However, alterations that involve structural changes, such as converting attics or basements to habitable spaces, adding or modifying walls, or extending electrical, plumbing, or HVAC systems, will likely require a building permit.
The International Existing Building Code (IEBC) provides guidelines for alterations, repairs, additions, and changes of occupancy. Generally, additions, alterations, or repairs must conform to the requirements for new structures without necessarily requiring the entire existing structure to comply, unless otherwise specified. However, these modifications must not render the existing structure unsafe or adversely affect its performance.
Demolition guidelines and permit requirements vary by locality but generally involve:
- Submitting a demolition permit application.
- Providing a site plan showing the structure to be demolished and its location.
- Evidence of disconnection of all public utilities (water, gas, electric, sewer).
- Proof of permission from the property owner.
- Details on the demolition method and equipment to be used.
- Information on where demolition debris will be deposited.
- Erosion and sediment control measures.
- Contractor licensing and insurance requirements, which may include county-level licensing (e.g., Johnson County).
For example, Leawood requires proof of utility disconnections, rat-abatement (if applicable), and erosion control. Leavenworth mandates utility disconnect notices, a Land Disturbance Permit, and sewer capping by a licensed plumber. Johnson County requires a building permit for demolition in unincorporated areas and specifies pedestrian protection measures based on the IBC. Lenexa requires utility disconnections, erosion control, and a performance bond.
Resources to Learn More