Permit Requirements for Chatham, Michigan
For HVAC projects in Chatham, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Alger County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for HVAC work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General HVAC Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for HVAC in this area, please submit an update.
Because Chatham is located within Alger County, the following broader county regulations may also apply to your project:
Michigan, Alger County Hvac Permit Regulations and County Ordinances for Unincorporated Areas
Alger County Building & Safety Divisions
In Alger County, building code administration and permitting are managed through the Alger County Building Codes Department. This department oversees the enforcement of building codes for various projects, including new construction and alterations. It is important to note that electrical, mechanical (HVAC), and plumbing permits are handled as separate issues from general building permits. For specific inquiries regarding mechanical permits, the county maintains designated inspectors for different trades.
Rules for Properties in Unincorporated Areas
Properties located in unincorporated areas of Alger County are subject to the same county-level building and mechanical code requirements as other areas under the jurisdiction of the Alger County Building Codes Department. While zoning is managed by individual townships, the county is responsible for the enforcement of the Michigan Mechanical Code. Property owners or their contractors must obtain the necessary mechanical permits before commencing HVAC work. Work should not be concealed until it has been inspected and approved by the appropriate mechanical inspector. It is recommended to contact the Alger County Building Codes Department directly to verify specific permit requirements for your project and to obtain the most current fee schedules and application forms.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Michigan:
Michigan Hvac Legislation, Codes, and Guidelines
Michigan HVAC Building Codes and Legislation
In Michigan, the regulation of heating, ventilation, and air conditioning (HVAC) systems is governed by a framework of state-adopted codes. The primary enabling legislation is the Stille-DeRossett-Hale Single State Construction Code Act (Public Act 230 of 1972), which authorizes the state to establish uniform construction standards.
For mechanical systems, Michigan has adopted the 2021 Michigan Mechanical Code, which is based on the 2021 International Mechanical Code (IMC) with specific Michigan amendments to address local climate, safety, and enforcement needs. For residential projects (one- and two-family dwellings), HVAC requirements are primarily contained within the Michigan Residential Code, which is based on the 2021 International Residential Code (IRC) with state-specific amendments.
These codes establish the minimum requirements for the design, installation, maintenance, alteration, and inspection of mechanical systems. Compliance with these standards is mandatory, and work typically requires a permit from the local Authority Having Jurisdiction (AHJ) and must be performed by a licensed mechanical contractor.
Primary State Agency
The Michigan Department of Licensing and Regulatory Affairs (LARA), specifically through its Bureau of Construction Codes (BCC), is the primary agency responsible for the adoption, administration, and enforcement of the statewide construction codes. The Bureau oversees the development of these codes, manages contractor licensing, and provides guidance on code compliance and permitting processes across the state.
Resources to Learn More