Permit Requirements for Yellowstone National Park, Wyoming
For Electrician projects in Yellowstone National Park, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Park County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for Electrician work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
- Within City Limits: The Yellowstone National Park Building Department typically oversees all local building, trade, and safety permits.
- Unincorporated Areas: Properties located outside of official city boundaries are generally governed by the Park County Building & Safety Division.
- Find Electrician Contractors in Wyoming
General Electrician Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for Electrician in this area, please submit an update.
Because Yellowstone National Park is located within Park County, the following broader county regulations may also apply to your project:
Wyoming, Park County Electrician Permit Regulations and County Ordinances for Unincorporated Areas
Park County Building and Safety Division Jurisdiction
Park County, Wyoming, through its Planning and Zoning Department, handles building permits for properties located in unincorporated areas of the county. If a property is within an incorporated city, that city's building department is responsible for permits.
Rules for Properties in Unincorporated Areas
For properties in unincorporated Park County, a building permit is generally required for construction. Specifically, construction proposed in a mapped Special Flood Hazard Area requires a permit.
Park County has not adopted specific building codes but encourages adherence to the International Building Code. The county does not issue Certificates of Occupancy or Certificates of Completion.
Electrical wiring permits are required prior to beginning new construction or remodeling if the work necessitates a public utility to connect or disconnect electrical power.
The State of Wyoming adopted the 2023 National Electric Code on July 1, 2023, and the 2024 International Codes on June 28, 2024.
Electrical work in Wyoming requires a state license. Both journeyman and master electrician licenses are issued by the Electrical Board of the Wyoming Department of Fire Prevention and Electrical Safety.
To obtain a journeyman electrician license, applicants typically need four years of work experience (8,000 hours) and 576 hours of classroom instruction. For a master electrician license, an additional four years of experience as a licensed journeyman and 576 hours of classroom instruction are generally required.
An electrical wiring permit fee of $50.00 is required, though this fee is waived if an electrical inspection is requested and paid for.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Wyoming:
Wyoming Electrician Legislation, Codes, and Guidelines
Wyoming State Building Codes and Electrician Legislation
In Wyoming, the installation of electrical equipment in buildings, mobile homes, and other premises is governed by the National Electrical Code (NEC). Wyoming statutes specify that the NEC, in its applicable minimum requirements, must be followed. If any provision in the International Fire Code, International Building Code, International Mechanical Code, International Existing Building Code, or International Fuel Gas Code conflicts with the NEC, the NEC takes precedence.
The State of Wyoming has adopted the 2024 International Codes, which include the International Building Code, International Fuel & Gas Code, International Mechanical Code, and International Existing Building Code. Additionally, the 2023 edition of the National Electrical Code (NEC) is in effect as of July 1, 2023.
The primary state agency responsible for setting and enforcing these standards, including electrical safety, is the Wyoming Department of Fire Prevention and Electrical Safety. This department, through its Electrical Board, is responsible for issuing electrician licenses and overseeing electrical installations.
Key legislation and statutes governing electricians in Wyoming include:
- Wyoming Statutes § 35-9-120: This statute outlines the minimum requirements for electrical installations, permits, and inspections, emphasizing adherence to the National Electrical Code.
- Wyoming Statutes § 35-9-123: This statute details the requirements for electrical installations to be performed by licensed electricians, with specific exceptions.
- Wyoming Administrative Code, Agency 049, Subagency 0033, Chapter 9, Section 9-10: This section of the administrative code specifically addresses electrical safety standards for child care facilities, mandating compliance with the National Electric Code.
- Wyoming Administrative Code, Agency 041, Subagency 0001, Chapter 5, Section 5-2: This pertains to the licensing of Electrical Contractors, Low Voltage Electrical Contractors, and Limited Electrical Contractors.
Resources to Learn More